Worker MOD Select Fire Module for Phoenix orders 2.0 Blaster Short Foam Dart Modify Toy

This electronic device designed for Worker MOD Phoenix 2.0 Blaster and the Swordfish blaster to control the power on the flywheel power as well as the number of auto fire darts. This is a DIY kit user need to rewire the circuit and replace the electronic items in the blaster, temperature senor would need to install in the flywheel cage and pusher motor cage to give alarm in case of high temperature. User suggest with high skill on electric circuit knowledge to work on this fire select module.

The display shown in Chinese only, user may make reference to below translation.

Major function on the fire select kit, as on the option of the module display sequence.
1. Select Blaster
1.1 Swordfish (direct pusher movement)
1.2 Phoenix 2.0 (lever pusher movement)

2. Flywheel control
2.1 Enable delay trigger (enable if you like to delay pusher rod after flywheel spin)
2.2 Delay Duration (0-1000ms, how long you like to delay pusher rod after flywheel spin)
2.3 Dart Pusher power (30%-100%, control on rate of fire)

3. Program set A/B on flywheel power and motion break
3.1 Flywheel power (50%-100%)
3.2 Enable Full power start (100% flywheel power when start)
3.3 Full power start duration (0-300ms, how long you want the 100% flywheel power start)
3.4 Enable flywheel motor instant break
3.5 Flywheel motor instant break duration (0-500ms)
3.6 Flywheel motor instant break power (5%-15%)

4. Program set 1/2 on Full Auto pusher control cycle
Full Auto / Single shot/ Double Shots/ Triple Shots/ 4 Shots/ 5 shots

5. Password
5.1 Enable password
5.2 set password (6 digits)

6. N/A

7. Overheat control
7.1 Overheat control on flywheel motors (45°C-80°C)
7.2 Overheat control on Darts Pusher motor (45°C-80°C)

8. Program version

Reminder: Do not keep trigger work over 5 seconds in case of overheating, circuit off orders automatically.